|
Overall Size: 1830 mm L x 575 mm W x 850 mm H (Approx.)
Construction: Front frame should be made out of 50 mm x 25 mm rectangular tube of 1.2 mm thick with 5 vertical supports and 2 horizontal support to form four compartments with doors. All doors, one drawer and a sliding pad should have 75 mm long stainless steel handle. One drawer and the door below the drawer should be fitted with godrej m.p. lock. It should have a sliding step stool below the third compartment. Second and fourth compartment should have one partition at the center.
Top should be made up of CRCA 1.2 mm thick sheet with all four side raised upward & pressed bend to 1800 . It should be provided with 100 mm thick 40 density foam covered with rexin and zip on two sides.
Finish: All components should be pretreated in separate eight tank process for better finish, good adhesion and corrosion protection. Process includes Hot Degreasing, Derusting, Activation, Phosphating & No’s of Water rinses as per IS 3618 - 1966 class ‘C’ type and then pretreated materials is coated with epoxy powder with film thickness of 60 microns (approx.) and then oven baked at 180 degree centigrade |
