Construction :

Main cabinet should be made of 1 mm thick “C” shaped one-piece box.  Cabinet should have one drawer at top & a box at bottom and open space in between drawer & box. Door should be made up of 1.2 mm thick CRCA sheet pivoted at top & bottom by 4 mm diameter pin. Door & drawer should have magnetic latch of 75mm long chrome plated brass handle.

Top of cabinet should be made up of Stainless steel sheet  304 grade and thickness 24 G.  Three sides of the top are raised by 10mm, front side bend downward and four sides of both tops are bend & pressed 1800  to avoid sharp edges, supported by 15 mm ply.  

The main cabinet should be fitted with 50 mm diameter 4 No’s Ball Casters.

Finish : 

All components should be pretreated in separate eight tank process for better finish, good  adhesion  and corrosion protection.  Process includes Hot Degreasing, Derusting, Activation, Phosphating & No’s of Water rinses as per IS  3618 - 1966 class ‘C’ type and then pretreated  materials is coated with epoxy powder with film thickness of 60 microns (approx.) and then oven baked at 180 degree centigrade