Construction : Bed frame should be made up of 60 mm x 30 mm x 16G CRCA rectangular tube with four sleeves of 40 mm diameter x 3 mm thick & 100 mm long welded at four corners with rubber buffers of 150 mm diameter. Four-flush I.V. Rod locations. Four sections top should be made up of 18G CRCA sheet double press bend on four sides and uniformly embossed holes from 25mm to 15mm diameter and embossing depth of 4mm in four rows and distance between holes should be 125mm apart. Backrest and leg end section should be welded to 25.4 mm diameter x 16G CRCA pipe, Fix section should be made up of 25 mm X 25 mm X 18G CRCA tube and 25 mm X 5 mm M. S. Flat welded to main frame. Knee frame should be made up of 50 mm X 25 mm  X 16G and 25 mm X 25 mm X 18G tube welded to 25 mm X 5 mm thick flat. Backrest and knee section can be adjusted by two separate screw mechanism with stainless steel folding handle. Base frame should be of 60 mm x 30 mm x 16G CRCA rectangular tube fitted with four no’s 125 mm dia x 37 mm width Rexellow make heavy duty swiveling castors, two with brake. Height adjustment, Trendelenburg & reverse trendelenburg by two separate screws & lever mechanism with stainless steel folding handles. Stainless steel bows of 31.75 mm diameter pipe of equal height of 280 mm bent at four places with horizontal support of 19mm x 19mm x 1mm thick square pipe. The bows should be fitted with embossed metal panel of size 450mm x 200mm. Four-flush I. V. Rod locations with Telescopic Saline Rod of Stainless Steel outer tube of 19 mm diameter and wall thickness of 2.5 mm having knob to lock 12 mm diameter  stainless steel Rod  which slide in outer tube.  Double hook of 8 mm diameter stainless steel Rod welded to 12 mm diameter Rod. Full-length Collapsible type stainless steel railings on both sides should be provided and material should be of stainless steel 25.4 mm diameter. Three horizontal telescopic type tubes housed in 25.4 mm x 25.4 mm x 18G CRCA square tube.