Construction: The Bed frame should be made up of 60mm X 30mm Rectangular CRCA 16G tube, with four sleeves of diameter 40 mm & 3 mm thick, 75 mm long welded at four corners. CRCA rectangular tubes 25 mm X 25 mm X 18 G should be welded to the main frame to support backrest frame. Frame  should have Four-flush I.V.Rod locations with S.S. Saline Rod of 12 mm. Backrest should be made up of  25.4 mm diameter X 16G CRCA tube and 18G sheet & should be adjusted by screw mechanism with stainless steel folding handle. Base frame should be of 60 mm x 30 mm x 16G CRCA rectangular tube welded with 60 mm x 30mm x 1.2mm thick legs with 125 mm heavy duty castors two with brake. Trendelenburg & reverse trendelenburg by screws & lever mechanism with a stainless steel folding handles. Stainless steel bows of 31.75 mm diameter pipe of equal height of 280 mm bent at four places with horizontal support of 19mm x 19mm x 1mm thick square pipe. The bows should be fitted with embossed metal panel of size 450mm x 200mm. Fix panel should be made up of 18G CRCA sheet double press bend on four sides and uniformly embossed holes from 25mm to 15mm dia and embossing depth of 4mm in four rows distance between holes should be 125mm. Panel is supported by two no’s box stiffners of 100 mm width along the length duly spot-welded. Panel should be supported on three no’s 25 mm X 25mm X 3 mm thick angles welded to main frame.