Construction :

The Bed frame should be made up of 60 mm X 30 mm X 16G CRCA rectangular tube with four sleeves of diameter 40 mm X 3 mm thick, 100 mm long welded at four corners. Four sections top should be made up of 18G CRCA sheet; double press bend on four sides and uniformly embossed holes from 25mm to 15mm dia and embossing depth of 4mm in four rows and distance between holes should be 125mm apart.

Backrest and leg end section should be welded to 25.4 mm diameter x 16G CRCA pipe. Fix section should be made up of 25 mm X 25 mm  X 18G CRCA tube and 25 mm X 5 mm M. S. Flat welded to main frame. Knee frame should be made up of 50 mm X 25 mm X 16G and 25 mm X 25 mm X 18G tube welded to 25 mm X 5 mm thick flat. Backrest and knee rest section can be adjusted by screw mechanism with separate stainless steel folding handle.

Stainless steel bows of 31.75 mm diameter pipe of equal height of 280 mm bent at four places with horizontal support of 19mm x 19mm x 1mm thick square pipe. The bows should be fitted with embossed metal panel of size 450mm x 200mm.


Off set Leg’s should be made up of 31.75 mm diameter and 535 mm long pipe welded to 37 mm X 37 mm X 3 mm thick X 150 mm long angle, outer side of angle should have 25 mm X 450 chamfer. 125 mm Dia heavy duty castors should be provided two with brakes. Four-flush  I.V. Rod locations with S.S. Saline Rod of 12 mm & arrangement to hold mosquito curtain poles.

Finish : 

All components should be pretreated in separate eight tank process for better finish, good  adhesion  and corrosion protection.  Process includes Hot Degreasing, Derusting, Activation, Phosphating & No’s of Water rinses as per IS  3618 - 1966 class ‘C’ type and then pretreated  materials is coated with epoxy powder with film thickness of 60 microns (approx.) and then oven baked at 180 degree centigrade